Triple the Zippers, Zero the Stress! How to Sew Your New Favorite Crossbody

While a bag with three separate zippered compartments might look like a daunting professional project, the construction is actually quite clever and straightforward.

In my latest tutorial, I pull back the curtain on these "triple-zip secrets" so you can achieve a high-end, organized look even if you’re relatively new to sewing.

Stop settling for messy bags and start sewing your way to a more organized life.

Whether you’re running errands or heading out for a coffee date, this crossbody is the perfect companion.

The finished measurements of this Crossbody bag are approximately
21㎝(8¼″) W × 12㎝(4¾″) H × 7㎝(2¾″) D.

CLICK HERE TO WATCH THE VIDEO TUTORIAL

You may watch the full video tutorial on my Youtube channel.

https://youtu.be/cCT7V4RDyug

Share this video with a lot of people who need it.

Let's get started!!

◆ Main panel

① 39.5㎝ × 32.5㎝ (15⅝″ × 12⅞″) Outer layer

① 39.5㎝ × 32.5㎝ (15⅝″ × 12⅞″) Fusible fleece

◆ Front pocket

① 22.5㎝ × 10.5㎝ (8⅞″ × 4¼″) Outer layer

① 22.5㎝ × 10.5㎝ (8⅞″ × 4¼″) Lining

◆ Zipper gusset

② 27.5㎝ × 3.5㎝ (10⅞″ × 1⅜″) Outer layer

② 27.5㎝ × 3.5㎝ (10⅞″ × 1⅜″) Lining

② 27.5㎝ × 3.5㎝ (10⅞″ × 1⅜″) Fusible fleece

◆ Inside pocket 1

② 27.5㎝ × 13.5㎝ (10⅞″ × 5⅜″) Lining

◆ Inside pocket 2

④ 27.5㎝ × 15㎝ (10⅞″ × 6″) Lining

◆ Handle

① 12㎝ × 8㎝ (4¾″ × 3¼″) Outer layer

◆ D-ring fabric

② 5㎝ × 6㎝ (2″ × 2⅜″) Outer layer

◆ Others

③ Roll Zipper_seam allowance included 27.5cm(10⅞″)

① 2㎝(3/4″) Wide Webbing Strap 120㎝(47½″)

② 2㎝(3/4″) Wide Swivel Snap Hook

② 1.5㎝(5/8″) Wide D-ring

▶Download Triple-Zip Crossbody PDF Sewing Pattern

▶Download Others PDF Sewing Patterns HERE

This bag features two types of inside pockets: a **middle pocket** (bottomless divider style) and **front/back pockets** (with boxed bottoms for depth).

Place the front pocket piece onto the right side of the main exterior fabric.

Align them properly and sew along the three sides (bottom and both side edges) to secure it.

Align two zippers with their right sides facing each other and sew them together.

Place the right side of the lining fabric against the right side of the zipper (sandwiching the zipper). Sew along the top edge.

Open the fabric pieces and topstitch just below the zipper teeth for a clean, professional finish.

Repeat this process for all three zippers until the main zipper sections are prepared.

Sew the zipper panels to the front and back zipper assemblies.

Place the lining pieces right sides together. Sew the side seams and the bottom edges.

Crucially, leave a **turning hole** (gap) at the bottom of the **middle pocket lining**. This will be used to turn the bag right side out later.

For the front and back pockets, fold the bottom corners and sew across them to create **boxed bottoms**. This gives the bag its 3D depth.

Spread out the zipper and zipper panel assembly. Align them with the side edges of the main fabric.

Match the center point of the zipper panels with the center of the main panels first. Pin them in place, then sew along the side lines. This step transforms the flat pieces into the final bag shape.