DIY Cozy Duffel Bag: Perfect Winter Accessory
Ready to add a warm touch to your winter wardrobe?
Our latest DIY guide helps you create a cozy duffel bag using faux fleece and leather.
This post includes detailed steps to craft a small, cylindrical bag with extra pockets.
It's a practical and stylish project that's great for personal use or as a handmade gift.
Join us in sewing a bag that brings warmth and style to any winter outfit.
The finished measurements of this bag are approximately
30㎝(11⅞″) W × 15㎝(6″) H × 15㎝(6″) D.
CLICK HERE TO WATCH THE VIDEO TUTORIAL
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◎ Main Panel
② 33㎝ × 20.5㎝ (13″ × 8⅛″) Faux Fur
① 33㎝ × 12㎝ (13″ × 4¾″) Fake Leather
① 33㎝ × 49㎝ (13″ × 19¼″) Lining
◎ Side Panel
② 17㎝ × 17㎝ (6¾″ × 6¾″) Fake Leather
② 17㎝ × 17㎝ (6¾″ × 6¾″) Lining
◎ Front Pocket
① 17㎝ × 19㎝ (6¾″ × 7½″) Fake Leather
◎ Side Pocket
② 17㎝ × 22㎝ (6¾″ × 8¾″) Faux Fur
◎ Others
① 30㎝ (11⅞″) Zipper
② 2㎝ × 3㎝ (3/4″ × 1¼″) Fake Leather
① 2.5㎝(1″) Wide Webbing Strap 150㎝(59¼″)
① 4㎝(1⅝″) wide bias tape 120㎝(47½″)
Fold thefront pocket piece wrong sides together in half, and stitch the top edge.
Place the front pocket on the right side of the outer layer and sew the 3 sides, leaving pocket entrance.
Place the bag strap on top and sew.
Place the right sides together of the main panel and bottom panel and sew with an allowance of about 1㎝(3/8″).
The pattern for making this can be drawn by yourself by watching my YouTube video.
Place the wrong sides together of the outer and lining and sew the round edges.
Fold the side pocket pieces wrong sides together in half, and stitch the top edge.
Place the side pockets on the right side of the side panel and sew, leaving pocket entrance.
Then cut outside the shape of the side.
With assembled lining right side up, center zipper right side facing up along top edge.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 0.3cm away from the zipper.
Turn it wrong side out. Place and sew the bias tape on the side of the main panel.
Mark the quarter of the side of the main panel and the quarter of the side panel.
Using the quarter marks, pin and sew all the edges with an allowance of about 1㎝(3/8″).
Fold the bias twice, cover the seam allowance, and sew.
You are finished!!!
(❁´◡`❁)
RELATED POSTS:
