DIY Crossbody Bag | Zipper Closure & 8 Pockets
Create your own crossbody bag that’s both stylish and functional!
This design includes 8 pockets (4 exterior, 4 interior) to keep your belongings organized.
The zipper closure ensures everything stays secure, and the adjustable, detachable strap allows you to use it as a tote bag as well.
Make a bag that perfectly fits your needs and personal style!
The finished measurements of this bag are approximately
25㎝(9⅞″) W × 25㎝(9⅞″) H × 8㎝(3¼″) D.
You may watch the full video tutorial on my Youtube channel.
https://youtu.be/pmprJ3S3x8g
Share this video with a lot of people who need it.
Let's get started!!
◆ Main Panel
② 35㎝ × 27㎝ (13¾″ × 10¾″) Outer layer
② 35㎝ × 4.5㎝ (13¾″ × 1¾″) Outer layer
② 35㎝ × 24.5㎝ (13¾″ × 9¾″) Lining
② 35㎝ × 27㎝ (13¾″ × 10¾″) Fusible fleece
◆ Bottom panel
① 27㎝ × 10㎝ (10¾″ × 4″) Outer layer
① 27㎝ × 10㎝ (10¾″ × 4″) Lining
① 27㎝ × 10㎝ (10¾″ × 4″) Fusible fleece
◆ Handle
② 38㎝ × 5㎝ (15″ × 2″) Outer layer
② 38㎝ × 5㎝ (15″ × 2″) Lining
② 36㎝ × 3㎝ (14⅛″ × 1¼″) Mid-weight woven fusible interfacing
◆ Outside pocket
② 41㎝ × 19.5㎝ (16¼″ × 7¾″) Outer layer
② 41㎝ × 19.5㎝ (16¼″ × 7¾″) Lining
② 39㎝ × 17.5㎝ (15½″ × 6⅞″) Mid-weight woven fusible interfacing
◆ Inside pocket
② 41㎝ × 37㎝ (16¼″ × 14⅝″) Lining
◆ Others
① 25㎝ (10″) Zipper
① 2.5㎝ (1″) Wide Webbing Strap 160㎝(63¼″)
② 2.5㎝ (1″) Wide D-ring
② 2.5㎝ (1″) Wide Swivel Snap Hook
① 2.5㎝ (1″) Wide Triglides Slide
Cut the main panel into the shape of the pattern.
Fold the inside pocket wrong sides together in half, and sew the top edge.
Place the inside pockets on the right side of the lining and sew.
Place the zipper between the outer layer and the lining and sew it.
Align the center of the bottom panel under the lining, and sew leaving 1㎝(3/8″) on both sides.
Place the right sides together of the two linings and sew the both sides with an allowance of about 1㎝(3/8″), leaving an opening.
Make the sides and bottom sides face each other and sew the bottom edges.
Place and sew the handles 9㎝(3⅝″) interval.
Place the right sides together of the outer and lining of the outside pocket and sew with an allowance of about 1㎝(3/8″).
Open out, press pieces away from and top stitch on 3㎜ (1/8″) away from the top.
Place the outside pockets on the right side of the main panel and sew.
Align the center of the bottom panel under the outer layer of the main panel, and sew leaving 1㎝(3/8″) on both sides.
Place the right sides together of the two outer layers and sew the both sides with an allowance of about 1㎝(3/8″).
Make the sides and bottom sides face each other and sew the bottom edges.
Place and pin the outer layer of the bag over the top of the lining with the right sides together.
Sew all the way around.
Turn it right side out by pulling the fabric through the opening.
Sew the opening hole close.
Topstitch all the way around of the top of the bag entrance.
Attach the strap.
You are Finished!!!
🐳🐳🐳
