DIY Half-Moon Zipper Pouch: A Step-by-Step Guide
Discover the joy of crafting with our step-by-step video on making a half-moon zipper pouch from fabric and a roll zipper.
I've designed this project in three sizes, and you can buy the patterns individually.
In this video tutorial, I'll show you how to create the smallest pouch, ideal for holding coins.
It's an easy and enjoyable project that you can complete with minimal effort.
The finished measurements of this pouch are approximately
9㎝(3⅝″) W × 5.5㎝(2¼″) H × 4㎝(1⅝″) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◆ Main Panel
① 13㎝ × 18.5㎝ (5⅛″ × 7½″) Outer layer
① 13㎝ × 18.5㎝ (5⅛″ × 7½″) Lining
① 13㎝ × 18.5㎝ (5⅛″ × 7½″) Fusible fleece
◆ Others
① 6㎝ × 10㎝ (2⅜″ × 4″) Outer layer
① 27㎝ (10¾″) Zipper
① 4㎝ (1⅝″) Wide double fold bias tape 10㎝ (4″)
Cut the fabric and interfacing into the shape of the pattern.
Fuse the fusible fleece, centered, to the wrong side of the outer layer.
Sew with an allowance of about 0.7㎝(1/4″).
Place tabs on both sides of the main panel and sew.
เน◕‿‿◕เน
Place the lining, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Then Turn right side out.
Fold the tab pieces in half, wrong sides together to make a crease.
Then fold each edge in toward the middle and press.
Stitch along both long edges of the strip, 0,2cm from the edge.
Cut in half and fold in half to make your tabs.
Assemble the zipper by inserting the zipper head.
Combine the seams so that a flat base is formed.
Sew with an allowance of about 1㎝(3/8″).
Attach the bias tape on the the corner seams.
You are finished!!!
