How to make a Diaper Bag with Divider
I’ll show you how to make a convenient tote bag with lots of pockets.
Cute pockets on the front and back of the bag allow you to easily store your phone.
And the divider inside the bag is completely blocked to the bottom so things don't get mixed up.
The wide bottom of the bag is good for storing a lot of things, so I think it would be appropriate to use it as a diaper bag.
Watch the video and post together and make your own multi-pocket tote bag.
The finished measurements of this pouch are approximately
22.5㎝(9″) W × 22.5㎝(9″) H × 20㎝(8″) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◎ Main Panel
② 44.5㎝ × 22㎝ (17⅝″ × 8¾″) Outer layer
② 44.5㎝ × 34.5㎝ (17⅝″ × 13¾″) Lining
② 42.5㎝ × 20㎝ (16⅞″ × 8″) Mid-weight woven fusible interfacing
◎ Bottom Panel
① 44.5㎝ × 27㎝ (17⅝″ × 10¾″) Outer layer
① 42.5㎝ × 25㎝ (16⅞″ × 9⅞″) Mid-weight woven fusible interfacing
◎ Outside Pocket
② 14㎝ × 32㎝ (5⅝″ × 12⅝″) Outer layer
② 12㎝ × 15㎝ (4¾″ × 6″) Mid-weight woven fusible interfacing
◎ Zipper Panel
② 19.5㎝ × 7.5㎝ (7¾″ × 3″) Outer layer
② 19.5㎝ × 7.5㎝ (7¾″ × 3″) Lining
② 17.5㎝ × 5.5㎝ (7″ × 2¼″) Mid-weight woven fusible interfacing
◎ Divider Panel
① 26㎝ × 45㎝ (10¼″ × 17¾″) Lining
① 22㎝ × 40㎝ (8¾″ × 15⅞″) Mid-weight woven fusible interfacing
① 14㎝ × 42㎝ (5⅝″ × 16⅝″) Lining
① 10㎝ × 40㎝ (4″ × 15⅞″) Mid-weight woven fusible interfacing
① 14.5㎝ × 22㎝ (5¾″ × 8¾″) Lining
① 12.5㎝ × 10㎝ (5″ × 4″) Mid-weight woven fusible interfacing
◎ Others
① 30㎝ (11⅞″) Zipper
① 5㎝ × 7㎝ (2″ × 2¾″) Zipper end fabric
① 3㎝(1¼″) wide Webbing Strap 150㎝(59¼″)
The pattern for making this can be drawn by yourself by watching my YouTube video.
Fold half the front pocket fabric, stitch the top.
Place the front pocket on the right side of the main panel. Sew 3 sides of the pocket leaving the top.
Place and sew the straps 12㎝ interval.
Fold the both sides of the zipper panel 1㎝.
With assembled lining right side up, center zipper right side facing up along top edge.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝ seam allowance.
🍒🍒🍒
Attach the outer and lining to the other side of the zip the same way.
Align the center of the main panel and the zipper panel and sew.
Place the right sides together of the main panel and bottom panel and sew with an allowance of about 1cm.
Fold half the main panel and sew the both sides.
Combine the seams so that a flat base is formed.
Sew with an allowance of about 1cm.
🐳🐳🐳
Fold half the divider panel and sew with an allowance of about 1cm, leaving an opening.
Turn right side out and stitch.
Place the divider on top of the largest divider and sew.
Place on the lining and sew in 1.5 cm from the bottom.
Place the other lining on top of them and sew the bottom with a seam allowance of 1cm.
🐶🐶🐶
Place the side of the divider in 1.2 cm from the side of the lining and sew.
Place the right sides together of the lining and sew the both sides with an allowance of about 1cm.
Combine the seams so that a flat base is formed.
Sew with an allowance of about 1cm.
Fold the outer and lining bag openings to within 1cm each and iron them.
Put the lining inside the outer layer and sew along the opening of the bag.
You are finished!!!
(●'◡'●)
Love this?
Click here for more Bag & Wallet sewing tutorials
