How to make a Double Layer Travel Pouch
Are you thinking of storing your toiletries and cosmetics separately in one bag?
Then this post is sure to inspire you.
How convenient would it be if the two spaces were clearly separated and the two types of items could be divided and stored?
If you follow my step-by-step tutorial, you'll soon have your own fancy toiletry bag.
The finished measurements of this pouch are approximately
21㎝(8¼″) W × 18㎝(7⅛″) H × 10㎝(4″) D.
CLICK HERE TO WATCH THE VIDEO TUTORIAL
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◎ Top & Bottom Panel
② 23㎝ × 12㎝ (9″ × 4¾″) Outer layer
② 23㎝ × 12㎝ (9″ × 4¾″) Lining
② 21㎝ × 10㎝ (8¼″ × 4″) Fusible fleece
◎ Side Panel
② 61㎝ × 10.5㎝ (24″ × 4¼″) Outer layer
② 61㎝ × 10.5㎝ (24″ × 4¼″) Lining
② 59㎝ × 8.5㎝ (23⅜″ × 3⅜″) Fusible fleece
◎ Inside Flap
② 23㎝ × 6.5㎝ (9″ × 2⅝″) Outer layer
② 23㎝ × 6.5㎝ (9″ × 2⅝″) Lining
② 23㎝ × 5.5㎝ (9″ × 2¼″) Mesh Fabric
◎ Zipper Panel
① 19㎝ × 3㎝ (7½″ × 1¼″) Outer layer
① 19㎝ × 3㎝ (7½″ × 1¼″) Lining
① 17㎝ × 1㎝ (6¾″ × 3/8″) Fusible fleece
◎ Others
① 42㎝ (16⅝″) / ② 20㎝ (8″) Zipper
② Zipper Slider
① 4㎝(1⅝″) wide bias tape 186㎝(59¼″)
① 1.5㎝(5/8″) wide Webbing Strap 25㎝(9⅞″)
With assembled lining right side up, center zipper right side facing up along top edge. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 0.2cm away from the zipper.
Place the Bias tape on the mesh fabric, sew along top edge using a 1㎝(3/8″) seam allowance.
Fold the bias tape.
Place the zipper, right side down on top and sew.
Fold the bias twice and sew.
Use the same process to sew the zipper to the other side of the mesh fabric.
🐶🐶🐶
Place the wrong sides together of the outer and lining of the top and bottom panel and sew around all the edge.
Place the bag strap on the top panel and sew 5cm at both end.
Insert the two zipper sliders into the zipper.
Place the zipper between the outer and lining ends of the zipper panel and sew.
Sew the outer and lining of the zipper panel together.
Place the wrong side of the zipper over the outer layer of the Inside Flap and sew.
🐳🐳🐳
Use the same process to sew the zipper to the other inside flap.
Fold the side panel right sides together in half, and sew with a seam allowance of 1cm.
Place the lining of the side panel on top of the zipper and sew.
Place the outer layer of the side panel right sides together on top of the zipper and sew
Open out, press pieces away from and top stitch on both 0.2cm away from the zipper.
Use the same process to sew the zipper to the other side of the side panel.
🍒🍒🍒
Turn the side panel wrong side out.
Place the right sides together of the side panel and top panel and sew with an allowance of about 1cm.
Stitch from the right side seam into seam, or sew manually from the backside.
YOU ARE FINISHED!
(❁´◡`❁)
RELATED POSTS:
