How I Made a Stylish Laptop Tote Bag with Canvas and Pockets

Looking for a handmade tote bag that’s perfect for work or school?

I made this tall canvas tote that fits a 15-inch laptop and has two handy front pockets! It took a bit of time and effort, but it turned out to be super practical and stylish.

I’ll show you every step so you can make one yourself, too!

The finished measurements of this bag are approximately

27㎝(10¾″) W × 36㎝(14⅛″) H × 1.5㎝(5/8″) D.

CLICK HERE TO WATCH THE VIDEO TUTORIAL

You may watch the full video tutorial on my Youtube channel.

https://youtu.be/DhS7gslde2w

Share this video with a lot of people who need it.

Let's get started!!

◆ Main panel _ Front outer layer

① 28.5㎝ × 9.5㎝ (11¼″ × 3¾″) Outer layer

① 28.5㎝ × 29.5㎝ (11¼″ × 11¾″) Lining

◆ Main panel _ Back outer layer

① 28.5㎝ × 8㎝ (11¼″ × 3¼″) Outer layer

① 28.5㎝ × 31㎝ (11¼″ × 12¼″) Outer layer

◆ Main panel _ Lining

② 28.5㎝ × 37.5㎝ (11¼″ × 14¾″) Lining

② 27㎝ × 36㎝ (10¾″ × 14⅛″) Fusible fleece

◆ Middle pocket

① 28.5㎝ × 32.5㎝ (11¼″ × 12⅞″) Outer layer

① 28.5㎝ × 28㎝ (11¼″ × 11⅛″) Lining

① 27㎝ × 29.5㎝ (10¾″ × 11¾″) Mid-weight woven fusible interfacing

◆ Front pocket Flap

① 27.5㎝ × 8.5㎝ (10⅞″ × 3⅜″) Outer layer

① 27.5㎝ × 8.5㎝ (10⅞″ × 3⅜″) Lining

① 26㎝ × 7㎝ (10¼″ × 2¾″) Mid-weight woven fusible interfacing

◆ Front pocket

① 31.5㎝ × 30㎝ (12½″ × 11⅞″) Outer layer

① 31.5㎝ × 30㎝ (12½″ × 11⅞″) Lining

① 30㎝ × 28.5㎝ (11⅞″ × 11¼″) Mid-weight woven fusible interfacing

◆ Handle

② 42㎝ × 5.5㎝ (16⅝″ × 2¼″) Outer layer

◆ Zipper panel

① 73㎝ × 3㎝ (28⅞″ × 1¼″) Outer layer

① 73㎝ × 3㎝ (28⅞″ × 1¼″) Lining

① 71.5㎝ × 1.5㎝ (28¼″ × 5/8″) Fusible fleece

◆ Others

① 53㎝ (21″) Zipper

① 3.5㎝ (1⅜″) Wide bias tape 260㎝ (103″)

① Plastic Snap Buttons

▶Download Laptop Tote Bag PDF Sewing Pattern

▶Download Others PDF Sewing Patterns HERE

Place the handle on the right side of the main panel and sew.

Place the right sides together of the outer and lining of the middle pocket and sew.

Open out, press pieces away from and top stitch on 3㎜ (1/8″) away from the top.

Place the right sides together of the flap and middle pocket and sew.

Fold the dart, matching up the lines as best as you can. Slowly sew along the marked line.

Place the right sides together of the outer and lining of the front pocket and sew the top.

Open out, press pieces away from and top stitch on 3㎜ (1/8″) away from the top.

Place the front pocket on the right side of the middle pocket and sew.

(●'◡'●)

Place the wrong sides together of the outer and lining and sew all the edges.

Sew the both ends of the zipper between the outer and lining of the zipper panel.

Do this by marking the quarter of your main panel and the quarter of your zipper panel (these are attached to each other at this point but just fold the piece in half to find the center).

Now, using your quarter marks, start pining the bottom of your zipper panel around the perimeter of your bottom.

Sew all the edges with an allowance of about 0.7㎝(1/4″).