Fast & Easy DIY Lunch Box Bag with Zipper & Handle
Looking for a quick and fun sewing project?
This DIY lunch box bag is just what you need!
With simple cuts and stitches, you can make a handy and adorable bag complete with a top handle and a mesh zipper pocket inside.
It's roomy enough to hold lunch or snacks, making it perfect for daily use.
Great for beginners and a joy to make!
The finished measurements of this bag are approximately
17㎝(6¾″) W × 20㎝(8″) H × 17㎝(6¾″) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◆ Main panel
① 53㎝ × 5㎝ (21″ × 2″) Outer layer
① 53㎝ × 18㎝ (21″ × 7⅛″) Outer layer
① 19㎝ × 56㎝ (7½″ × 21¾″) Outer layer
① 51㎝ × 3㎝ (20¼″ × 1¼″) Fusible fleece
① 51㎝ × 16㎝ (20¼″ × 6¼″) Fusible fleece
① 17㎝ × 54㎝ (6¾″ × 21¼″) Fusible fleece
◆ Pocket panel
① 19㎝ × 4㎝ (7½″ × 1⅝″) Mesh Fabric
① 19㎝ × 13㎝ (7½″ × 5⅛″) Mesh Fabric
◆ Handle
① 22㎝ × 8㎝ (8¾″ × 3¼″) Outer layer
◆ Others
① 53㎝ (21″) Zipper
① 16㎝ (6¼″) Zipper
② 4㎝ × 5㎝ (1⅝″ × 2″) Zipper Tab
① Double fold bias tape 200㎝ (79″)
With assembled lining right side up, center zipper right side facing up along top edge.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 3㎜ (1/8″) away from the zipper.
Place the bias tape on the edge of the mesh fabric and sew.
Place the zipper 1㎝(3/8″) between the two mesh fabrics and sew.
Place the handle on the long main fabric outer fabric, and place the zipper pocket on the lining and sew.
Place the wrong sides together of the outer and lining and sew the all edges.
Sew the zipper panel and the center of the long main fabric.
Sew the other side in the same way.
Place the right sides together of the zipper panel and the long main fabric and sew the three sides with an allowance of about 1㎝(3/8″).
Just put the seam allowance between the bias tapes and sew, and you're done!!!
🐳🐳🐳
