Craft Your Own Everyday Tote with Handy Side Pockets

Ever wished for a tote bag that combines style and practicality?

This tutorial walks you through crafting a versatile canvas bag with multiple pockets, including convenient side pockets!

Perfect for daily use, this tote is simple to make and completely customizable.

Get ready to create your new favorite accessory!

The finished measurements of this bag are approximately

30㎝(11⅞″) W × 25㎝(9⅞″) H × 12.5㎝(5″) D.

CLICK HERE TO WATCH THE VIDEO TUTORIAL

You may watch the full video tutorial on my Youtube channel.

https://youtu.be/sloZjOX2fkM

Share this video with a lot of people who need it.

Let's get started!!

◆ Main Panel

① 57㎝ × 27㎝ (22⅜″ × 10¾″) Outer layer

① 32㎝ × 27㎝ (12⅝″ × 10¾″) Outer layer

② 44.5㎝ × 27㎝ (17⅝″ × 10¾″) Lining

◆ Bottom panel

① 32㎝ × 14.5㎝ (12⅝″ × 5¾″) Outer layer

① 32㎝ × 14.5㎝ (12⅝″ × 5¾″) Lining

◆ Front Pocket

① 17㎝ × 29㎝ (6¾″ × 11½″) Outer layer

◆ Side Pocket

② 30㎝ × 22.5㎝ (11⅞″ × 8⅞″) Outer layer

② 30㎝ × 22.5㎝ (11⅞″ × 8⅞″) Lining

◆ Inside Pocket

② 32㎝ × 34㎝ (12⅝″ × 13½″) Lining

◆ Strap

② 7㎝ × 110㎝ (2¾″ × 43½″) Outer layer

◆ Others

Magnetic Buttons

Mid-weight woven fusible interfacing

Sewing Label

Fold the front pocket fabric in half and top stitch on 3㎜ (1/8″) away from the top. Then place it on the front right side of the front panel and sew on three sides.

Refer to the video to cut the side pocket fabric. Place the right sides together of the outer and lining and sew with an allowance of about 1㎝(3/8″). Open out, press pieces away from and top stitch on 3㎜ (1/8″) away from the top. Then place it on both sides of the front pocket and sew on three sides.

Fold along both long edges of the the strap pieces 1㎝(3/8″) inward. Then fold each edge in toward the middle and press.

Stitch along both long edges of the strip, 3㎜ (1/8″) from the edge.

Place the strap on the front and back panels at 15㎝(6″) intervals and sew only up to 22㎝(8¾″) in height.

Align the sides of the front and back panels sew with an allowance of about 1㎝(3/8″).

Mark the quarter of your bottom panel and the quarter of your main panel.

Using your quarter marks, start pining the bottom of your main panel around the perimeter of your bottom.

Sew all the edges with an allowance of about 1㎝(3/8″).

Fold the inner pocket right sides together in half, and sew both sides with a seam allowance of 1㎝(3/8″). Turn it right side out, sew the top, and place it on the right side of the lining and sew.

Place the right sides together of the main and bottom panel and sew the bottom with an allowance of about 1㎝(3/8″).

Place the right sides together of the lining panels and sew the both sides with an allowance of about 1㎝(3/8″), leaving an opening.

Combine the seams so that a flat base is formed and sew with an allowance of about 1㎝(3/8″).