Multipurpose Pouch DIY Tutorial
Are you ready to take your organization game to the next level?
Our DIY fabric pouch tutorial is just what you need!
This multipurpose pouch is perfect for storing all your essentials, with its small pocket on the front and zipper pocket on the back.
Whether you're a student, artist, or traveler, this handmade accessory is sure to become a staple in your collection.
Follow along as we show you how to sew this practical and stylish pouch, perfect for keeping your supplies organized and accessible.
The finished measurements of this pouch are approximately
21㎝(8¼″) W × 9.5㎝(3¾″) H × 6㎝(2⅜″) D.
CLICK HERE TO WATCH THE VIDEO TUTORIAL
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◆ Main Panel
① 23㎝ × 11.5㎝ (9⅛″ × 4½″) Outer layer
③ 23㎝ × 11.5㎝ (9⅛″ × 4½″) Lining
② 23㎝ × 11.5㎝ (9⅛″ × 4½″) Fusible fleece
◆ Front Pocket
① 10㎝ × 16㎝ (4″ × 6¼″) Outer layer
◆ Zipper Pocket
① 23㎝ × 4.5㎝ (9⅛″ × 1¾″) Outer layer
① 23㎝ × 4.5㎝ (9⅛″ × 1¾″) Lining
① 23㎝ × 8㎝ (9⅛″ × 3¼″) Outer layer
① 23㎝ × 8㎝ (9⅛″ × 3¼″) Lining
◆ Zipper Panel
② 27㎝ × 4.5㎝ (10¾″ × 1¾″) Outer layer
② 27㎝ × 4.5㎝ (10¾″ × 1¾″) Lining
② 27㎝ × 4.5㎝ (10¾″ × 1¾″) Fusible fleece
◆ Gusset
① 36.5㎝ × 8㎝ (14½″ × 3¼″) Outer layer
① 36.5㎝ × 8㎝ (14½″ × 3¼″) Lining
① 36.5㎝ × 8㎝ (14½″ × 3¼″) Fusible fleece
◆ Handle
① 6㎝ × 25㎝ (2⅜″ × 9⅞″) Outer layer
① 6㎝ × 44㎝ (2⅜″ × 17½″) Outer layer
◆ Others
① 20㎝(8″) Zipper, ① 27㎝(10¾″) Zipper
② 3㎝ × 5㎝ (1¼″ × 2″) Outer layer for Full Tap
② 3.5㎝ × 3㎝ (1⅜″ × 1¼″) Outer layer for Zipper End
② 3.5㎝ × 3㎝ (1⅜″ × 1¼″) Lining for Zipper End
Fold the front pocket fabric in half and topstitch.
Place it on the main panel and sew.
With assembled lining of the zipper pocket right side up,
center zipper right side facing up along top edge.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 0.3cm away from the zipper.
Place it on the lining of the main panel and sew all the edges.
Place and sew the handles 8㎝(3¼″) interval.
Attach the zipper to the outer layer of the zipper panel.
Fold the lining of the zipper panel inward at 1cm (3/8″).
Align the center of the main panel with the gusset.
Sew leaving each 1㎝(3/8″) on the both ends of the main panel.
Align and sew both ends of the zipper panel to both ends of the gusset.
Align the center of the zipper panel with the center of the main panel.
Sew on 3 sides with an allowance of about 1㎝(3/8″).
Assemble the lining in the same way as the outer layer.
Turn the lining right side out.
Put the outer layer into the lining and align the opening.
Secure the lining to the inside of the zipper with a blind stitch.
You are finished!!
