Creative Zipper Pouch Tutorial: Peanut Shape Design!
Welcome to our latest DIY sewing tutorial, where we'll guide you through crafting a unique and stylish zipper pouch with a round peanut shape design.
Perfect for storing cosmetics or small essentials, this pouch is not only practical but also adds a touch of creativity to your sewing projects.
Join us as we explore the step-by-step process of creating this eye-catching accessory that's sure to impress.
The finished measurements of this pouch are approximately
20㎝(8″) W × 12㎝(4¾″) H × 5㎝(2″) D.
CLICK HERE TO WATCH THE VIDEO TUTORIAL
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◎ Main Panel
② 22㎝ × 14㎝ (8¾″ × 5⅝″) Outer layer
② 22㎝ × 14㎝ (8¾″ × 5⅝″) Lining
② 22㎝ × 14㎝ (8¾″ × 5⅝″) Fusible fleece
◎ Zipper Panel
② 27㎝ × 4㎝ (10¾″ × 1⅝″) Outer layer
② 27㎝ × 4㎝ (10¾″ × 1⅝″) Lining
② 27㎝ × 4㎝ (10¾″ × 1⅝″) Fusible fleece
◎ Gusset
① 31㎝ × 7㎝ (12¼″ × 2¾″) Outer layer
① 31㎝ × 7㎝ (12¼″ × 2¾″) Lining
① 31㎝ × 7㎝ (12¼″ × 2¾″) Fusible fleece
◎ Inside Pocket
① 22㎝ × 18㎝ (8¾″ × 7⅛″) Lining
◎ Others
② 3㎝ × 5㎝ (1¼″ × 2″) Outer layer
① 25㎝ (10″) Zipper
① 4㎝(1⅝″) wide bias tape 130㎝(51⅜″)
Fold the inside pocket in half.
And topstitch on top.
Place the inner pocket on the right side of the lining and sew.
Place the wrong sides together of the outer and lining and sew all the edge.
With assembled lining right side up, center zipper right side facing up along top edge.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 0.3cm away from the zipper.
Place the zipper panel between the gusset lining and the outer layer.
Align both ends and sew.
Turn it inside out.
Place the right sides together of the lining of the zipper panel and bias tape and sew with an allowance of about 0.7㎝(1/4″).
Match the quarter points of the main panel and zipper panel.
Sew with a 1cm seam allowance.
Fold the bias twice and cover the seam allowance.
Just sew and you're done!!!
เน◕‿‿◕เน?
RELATED STORIES
