DIY Notion Pouch: A Must-Have Organizer for Crafters
Elevate your crafting game with a DIY folding tray pouch.
This tutorial unveils a creative solution for storing sewing and knitting tools in a compact, foldable design.
With easy-to-follow instructions, you'll craft a pouch that not only stores but also displays your tools in an unfolded tray.
Perfect for crafters of all levels, this project promises to declutter your workspace stylishly.
The finished measurements of this pouch are approximately
17.5㎝(7″) W × 10㎝(4″) H × 5㎝(2″) D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◎ Main Panel
① 29.5㎝ × 27.5㎝ (11¾″ × 10⅞″) Outer layer
① 29.5㎝ × 27.5㎝ (11¾″ × 10⅞″) Lining
① 27.5㎝ × 25.5㎝ (10⅞″ × 10⅛″) Fusible fleece
① 8㎝ × 4㎝ (3¼″ × 1⅝″) Contrast Color Fabric
◎ Others
① 7.5㎝ (3″) Hook and Loop
Cut the interfacing into the shape of the pattern.
Attach the interfacing to the center of the wrong side of the fabric.
Fold your Contrast color fabric in half with the width, wrong sides together to make a crease.
Fold in half with height to make your tabs.
Place the tap on the center of the outer layer.
Place the right sides together of the outer and lining and sew, leaving an opening.
Cut by adding 1㎝(3/8″) from the edge of the interfacing.
Clip the corners and turn it right side out by pulling the fabric through the opening.
Press, pin and topstitch around all the edges.
Separate the hook and loop, place it on the inside and outside, and sew.
Turn the sides up and sew the four corners on the inside.
To complete, fold both sides inward first, then the bottom up, and then the top down.
เน◕‿‿◕เน?
RELATED POSTS:
