Easy to Make a Large Reusable Bag
Today I made a reusable shopping bag that can be easily folded.
It has a zipper so you don't have to worry about things spilling out, and it has a large capacity so it can hold a lot of things.
Would you like to easily make a light and convenient bag with me?
The finished measurements of this pouch are approximately
40㎝(15⅞″) W × 40㎝(15⅞″) H × 30㎝(11⅞″) D.
CLICK HERE TO WATCH THE VIDEO TUTORIAL
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◎ Main Panel
① 74㎝ × 101㎝ (29⅛″ × 39¾″) Outer layer
◎ Finishing Panel
② 23㎝ × 5.5㎝ (9″ × 2¼″) Outer layer
◎ Others
① 74㎝ (29⅛″) Zipper
① 2.5㎝ (1″) wide Webbing Strap 170㎝ (67″)
② 2.5㎝ (1″) wide Rectangle Ring
② 2.5㎝ (1″) wide Triglides Slide
① 1.5㎝ (5/8″) Elastic band 20㎝ (8″)
It is best to use a thin waterproof cloth, polyester, or nylon fabric as the main fabric.
With assembled outer layer right side up, center zipper right side facing down along top edge. Pin in place. Using your zipper foot, sew along top edge using a 3/8″ seam allowance.
Open out, press pieces away from and top stitch on 0.3cm away from the zipper.
Use the same process to sew the zipper to the other side of the bag pieces.
Fold it 10cm inches wide around the zipper as shown above.
😄😄😄
Sew the both sides.
Place and sew the elastic band on the side.
Insert the finishing panel at both ends and sew.
Fold the finishing fabric out and sew the ends.
Place bag straps on both sides of the zipper and sew.
Attach Triglides Slide to the bag strap.
You are finished!!
(●'◡'●)
Love this? Click here for more Bag & Wallet sewing tutorials
