How to Sew the Trendiest Crescent Crossbody Bag
If you've been scrolling through social media lately, you know that crescent sling bags are everywhere right now!
They’re stylish, comfortable to wear, and hold way more than they look like they should.
Today, I’m sharing a complete step-by-step tutorial on how to sew your very own crescent crossbody bag featuring neat inner pockets for ultimate organization.
The best part? You can download the digital pattern and create this beauty in two different sizes depending on your daily needs.
Grab your favorite fabric and let’s get sewing!
The finished measurements of this Luna Crossbody Bag are approximately
29cm(11½") W × 17cm(6¾") H × 10cm(4") D.
29cm(11½") W × 17cm(6¾") H × 10cm(4") D.
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◆ Main panel
② 30.5cm × 20cm (12" × 8") Exterior
② 30.5cm × 20cm (12" × 8") Lining
② 30.5cm × 20cm (12" × 8") Fusible fleece
◆ Gusset
① 50.5cm × 11.5cm (20" × 4½") Exterior
① 50.5cm × 11.5cm (20" × 4½") Lining
① 50.5cm × 11.5cm (20" × 4½") Fusible fleece
◆ Interior pocket
① 27cm × 23.5cm (10¾" × 9¼") Lining
◆ Strap Attachment Tab
④ 6cm × 4.5cm (2⅜" × 1¾") Exterior
④ 6cm × 4.5cm (2⅜" × 1¾") Lining
◆ Strap
① 150cm × 10cm (59¼" × 4") Exterior
◆ Others
① 32cm(12⅝") Roll Zipper_seam allowance included
① 2.5cm(1") Wide Slider Buckle
① 2.5cm(1") Wide Rectangle Ring
② 3.5cm(1⅜") Wide bias tape 60cm(23¾")
Prepare the interior pocket by folding, pressing, and topstitching the top edge, then stitch it to the inner lining to divide the compartments.
Sandwich the zipper between the exterior and lining Main Panels, stitch along the edge, and topstitch for a clean finish.
Attach the Strap Attachment Tabs to both ends of the zipper by sandwiching the zipper end between the exterior and lining tabs.
Construct the adjustable strap by folding the fabric into quarters, topstitching along both edges, and threading it through the slider buckle and Rectangle Ring.
Prepare the Gusset by basting the exterior and lining together, folding and stitching the side darts to form the shape, and attaching Strap Attachment Tabs to both ends.
Open the main zipper halfway before assembling to ensure you can turn the bag right side out later.
Match the center marks and tabs of the Main Panel and Gusset right sides together, then stitch around the entire perimeter.
Trim the seam allowances diagonally at the corners to reduce bulk and create smooth curves.
Bind all raw interior seams using bias tape, folding the ends neatly for a durable and clean interior finish.
All done! We hope you enjoy creating your own wonderful piece.
And be sure to check out the
[Sewingtimes YouTube channel] for more creative projects.
And be sure to check out the
[Sewingtimes YouTube channel] for more creative projects.
🔽