Upgrade Your Sewing Skill with a Double Layer Pencil Case!
Say goodbye to clutter with this double-layered pencil case that’s all about smart storage!
Equipped with two zippers and plenty of space, it easily holds all your stationery – and doubles as a makeup or travel pouch.
The convenient handle makes it a breeze to carry, keeping you organized wherever you go.
Ready to get creative? We’ll show you exactly how to make one, so join in and make yours today!
The finished measurements of this pencil case are approximately
20㎝(8″) W × 8㎝(3¼″) H × 9㎝(3⅝″) D.
CLICK HERE TO WATCH THE VIDEO TUTORIAL
You may watch the full video tutorial on my Youtube channel.
Share this video with a lot of people who need it.
Let's get started!!
◆ Main Panel
② 30㎝ × 9.5㎝ (11⅞″ × 3¾″) Outer layer
② 30㎝ × 9.5㎝ (11⅞″ × 3¾″) Lining
② 30㎝ × 9.5㎝ (11⅞″ × 3¾″) Fusible fleece
◆ Bottom Panel
① 23㎝ × 11㎝ (9⅛″ × 4⅜″) Outer layer
③ 23㎝ × 11㎝ (9⅛″ × 4⅜″) Lining
② 23㎝ × 11㎝ (9⅛″ × 4⅜″) Fusible fleece
◆ Side Panel
① 13㎝ × 5㎝ (5⅛″ × 2″) Outer layer
① 30㎝ × 5㎝ (11⅞″ × 2″) Outer layer
① 41㎝ × 5㎝ (16¼″ × 2″) Lining
① 41㎝ × 5㎝ (16¼″ × 2″) Fusible fleece
◆ Back Panel
① 19㎝ × 6㎝ (7½″ × 2⅜″) Outer layer
① 19㎝ × 6㎝ (7½″ × 2⅜″) Lining
① 19㎝ × 6㎝ (7½″ × 2⅜″) Fusible fleece
◆ Handle
① 20㎝ × 6㎝ (8″ × 2⅜″) Outer layer
◆ Others
① Roll Zipper 71㎝ (28″)
② 3㎝ × 5㎝ (1¼″ × 2″) Outer layer
① 4㎝ (1⅝″) Wide bias tape 130㎝ (51⅜″)
With assembled lining right side up, center zipper right side facing up along top edge.
Place the outer layer, right side down on top. Pin in place.
Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Open out, press pieces away from the zipper.
Attach the outer and lining to the other side of the zip the same way.
Open out, press pieces away from and top stitch on both 0.3㎝(1/8″) away from the zipper.
Bring the two sides of the edge together and sew them together to form a corner. Make a total of four corners.
Place the wrong sides together of the outer and lining and sew the edges.
Place the handle on the short side panel of the outer layer and sew. And place the right sides together of the two side panel of outer layer and sew to make them the same length as the lining.
With assembled lining right side up, center zipper right side facing up along top edge. Place the outer layer, right side down on top. Pin in place. Using your zipper foot, sew along top edge using a 1㎝(3/8″) seam allowance.
Open out, press pieces away from and top stitch on 0.3㎝(1/8″) away from the zipper.
Place the right sides together of the zipper panel and back panel and sew with an allowance of about 1㎝(3/8″).
Place the right sides together of the other side of the back panel and the other side of the zipper panel and sew with an allowance of about 1㎝(3/8″).
Place and sew the zippered portion of the side panel on the outside of the main panel.
Place and sew them on the bottom panel. The small snips will help the side panel adapt to the curved edge of the main panel.
Place and sew bias tape on the seam allowance. Fold the bias twice, cover the seam allowance, and sew.
Attach the other bottom to the other side of the side panel the same way.
You are finished!!!
🍒🍒🍒
